Target selectors

Target selectors are used in commands to select players and entities arbitrarily, without needing to specify an exact player name or a UUID. One or more entities can be selected with a target selector variable, and targets can be filtered from the selection based on certain criteria using the target selector arguments.

Target selector variables

Summary of target selector variables

Variable	Selects
@p	the nearest player
@r	a random player
@a	all players
@e	all entities
@s	the entity executing the command
@c	the player's agentTemplate:Only
@v	all agentsTemplate:Only
@initiator	the player who clicks an NPC dialogue buttonTemplate:Only

A target selector variable identifies the broad category of targets to select. There are five (six Template:In, eight Template:In) variables:

@p

Selects the nearest player from the command's execution. If there are multiple nearest players, caused by them being precisely the same distance away, the player who most recently joined the server is selected.

Template:IN, @p only selects players who are alive.

@r

Selects a random player.

Template:El can use @r to select non-player entities via the type selector argument; Template:In, to select a random entity, use @e[sort=random] instead.

Template:IN, @r can only select entities who are alive.

@a

Selects every player, alive or not.

@e

Selects all alive entities (including players) in loaded chunks.

@s

Selects the entity (alive or not) that executed the command. It does not select anything if the command was run by a command block or server console.

@cTemplate:Only

Selects the player's agent only.

@vTemplate:Only

Selects all agents. Works only if more than one agent exists.

@initiatorTemplate:Only

Selects the player who interacts with a button in a JSON NPC dialogue.

Target selector arguments

Summary of target selector arguments

Selection by Spatial Properties
Argument(s)	Selection criteria
x, y, z	coordinate
distanceTemplate:Only r, rmTemplate:Only	distance
dx, dy, dz	volume dimensions
x_rotationTemplate:Only rx,rxmTemplate:Only	vertical rotation (pitch)
y_rotationTemplate:Only ry,rymTemplate:Only	horizontal rotation (yaw)
Selection by Scoreboard Values
Argument(s)	Selection criteria
scores	scores
tag	tag
team Template:Only	team name
Selection by Entity Species
Argument(s)	Selection criteria
name	entity name
type	entity type
familyTemplate:Only	entity family
predicateTemplate:Only	predicate
Selection by Entity Data
Argument(s)	Selection criteria
nbtTemplate:Only	nbt
hasitemTemplate:Only	item
Selection by Player Data
Argument(s)	Selection criteria
levelTemplate:Only l,lmTemplate:Only	experience level
gamemodeTemplate:Only mTemplate:Only	game mode
advancementsTemplate:Only	advancements
haspermissionTemplate:Only	permission
Selection by Traits
Argument(s)	Selection criteria
limit,sortTemplate:Only cTemplate:Only	limit

After a target selector, optional arguments can be used to narrow down the set of targets to a group that also matches certain criteria. When used with @a or @e, arguments narrow down the targets from the full list to a specific group. When used with @p or @r, the nearest or random player is selected from the group. When used with @s, the player using the command is targeted only if they would be in the narrowed group.

Argument-value pairs appear within square brackets after the target selector variable, separated by commas:

@<variable>[<argument>=<value>,<argument>=<value>,...].

Template:IN, arguments and values are case-sensitive. Spaces are allowed around the brackets, equal signs, and commas, except Template:In between the target variable and the first bracket. Commas must be used to separate argument-value pairs.

If there are multiple argument-value pairs, they all must be satisfied to add a potential target to the group. (In other words, they are AND-ed together).

Position arguments

[x=<value>,y=<value>,z=<value>] — Define a position in the world the selector starts at, for use with the distance argument, the volume arguments, or the limit argument. Using these arguments alone will not restrict the entities found, and will only affect the sorting of targets. Cannot duplicate any one of these three arguments.

The positional components are doubles, allowing for values like +12.34. Template:IN they are not center-corrected, meaning x=0 is not corrected to x=0.5. Template:IN, positions that are written as integers are center-corrected, x=0 will become x=0.5. To avoid this, use x=0.0 instead.

Template:IN, tilde notation is available for selector argument coordinates. Note: Caret notation is not.

Template:IN, these arguments limit the search of entities to the current dimension.

Selecting targets by distance

Filter target selection based on their Euclidean distances from some point, searching for the target's feet (a point at the bottom of the center of their hitbox). If the positional arguments are left undefined, radius is calculated relative to the position of the command's execution. This argument limits the search of entities to the current dimension. Cannot duplicate these arguments.

Template:IN: [distance=<value>] — Specifies the range of distance. Float ranges are supported to select a specific region. Only unsigned values are allowed.

Template:IN: [r=<value>] and [rm=<value>] — Specifies the maximum and minimum range to find entities, respectively. Only unsigned values are allowed.

Examples Template:In:

• @e[distance=10] — Target all entities exactly ten blocks away.
• @e[distance=8..16] — Target all entities more than eight blocks, but less than 16 blocks away (inclusive).

Examples Template:In:

• @e[rm=9,r=10] — Target all entities exactly ten blocks away.
• @e[rm=7,r=16] — Target all entities from 8 to 16 blocks away.

Selecting targets by volume

[dx=<value>,dy=<value>,dz=<value>] — Filter target selection based on their x-difference, y-difference, and z-difference from some point, as measured by entities' hitboxes Template:In or by their feet Template:In. Cannot duplicate any one of these three arguments.

This can be interpreted as creating a rectangular volume defined by an initial position (<x>,<y>,<z>) and diagonal vector (<dx>,<dy>,<dz>), then selecting all entities whose hitboxes are at least partially contained by that volume Template:In, or whose feet are within that volume Template:In. If the positional arguments are left out, the selection is interpreted as originating from the position of the command's execution. Any values are allowed, including signed and fractional numbers.

Note that dx,dy,dz specify signed differences from the given coordinate. They do not specify a separate coordinate, nor do they extend in both the positive and negative directions.

Additionally, when any volume argument is present, the rest are assumed to equal zero unless otherwise defined.

Examples Template:In:

• @e[x=1,dx=4,y=2,dy=5,z=3,dz=6] — Select all entities whose hitbox collides with the block region (1~5, 2~7, 3~9) (or, mathematically speaking, the region that is {(x,y,z)∈R³|x∈[1.0,5.0),y∈[2.0,7.0),z∈[3.0,9.0)}).
• @e[x=1,y=2,z=3,dx=0,dy=0,dz=0] — Select all entities whose hitbox contains the point (1,2,3).

Examples Template:In:

• @e[x=1,dx=4,y=2,dy=5,z=3,dz=6] — Select all entities whose feet are within the block region (1~5, 2~7, 3~9).
• @e[x=1,y=2,z=3,dx=0,dy=0,dz=0] — Select all entities whose feet contains the point (1, 2, 3).

It is possible to combine selection by distance and selection by volume, in which case the command select targets only within the overlap of both regions (within a certain radius of the volume's initial point and not outside the defined volume).

Selecting targets by scores

[scores={<objective>=<value>,...}] — Filter target selection based on their scores in the specified objectives. All tested objectives are in a single object, separated by commas. Each objective and score value pair is separated by an equals sign. The score values support integer ranges. Cannot duplicate this argument.

• @e[scores={myscore=10}] — Select all entities with a score in objective myscore of exactly ten.
• @e[scores={myscore=10..12}] — Select all entities with a score in objective myscore of between ten and 12 (inclusive).
• @e[scores={myscore=5..}] — Select all entities with a score in objective myscore of five or greater.
• @e[scores={myscore=..15}] — Select all entities with a score in objective myscore of 15 or less.
• @e[scores={foo=10,bar=1..5}] — Select all entities with a score in objective foo of exactly ten, and a score in objective bar of between one and five (inclusive).

Template:IN, ! can be used to invert selection.

• @e[scores={myscore=!10}] — Exclude any entities with a score in objective myscore of exactly ten.
• @e[scores={myscore=!10..15}] — Exclude any entities with a score in objective myscore of between ten and 15 (inclusive).

Selecting targets by tag

Filter target selection based on the entity's scoreboard tags. Multiple tag arguments are allowed, and all arguments must be fulfilled for an entity to be selected.

[tag=<string>] — Include only targets with the specified tag.

[tag=!<string>] — Exclude any targets with the specified tag.

[tag=] — Include only targets with exactly zero tags.

[tag=!] — Exclude any targets that have at least one tag.

Selecting targets by team

Filter target selection based on teams. Arguments testing for equality cannot be duplicated, while arguments testing for inequality can.

[team=<teamName>] — Include only targets in the given team.

[team=!<teamName>] — Exclude any targets in the given team.

[team=] — Include only targets not in a team.

[team=!] — Exclude any targets not in a team.

Limiting and sorting target selection

Limit the number of selectable targets for a target selector.

When using the variables @p and @r, this argument defaults to one. Applying the limiting argument to them may increase the number of nearest or random targets selected. When applying this argument to @a or @e, this argument returns only a limited number of targets. Cannot duplicate these arguments.

Template:IN: [limit=<value>,sort=(nearest|furthest|random|arbitrary)] — Limit the number of targets, and specify selection priority.

• sort=nearest — Sort by increasing distance. (Default for @p)
• sort=furthest — Sort by decreasing distance.
• sort=random — Sort randomly. (Default for @r)
• sort=arbitrary — Do not sort. This will often return the oldest entities first due to how the game stores entities internally, but no order is guaranteed. (Default for @e, @a)

Template:IN: [c=<value>] — Limit the number of targets.

For @p, @a, and @e, [c=<value>] selects only the specified number of targets by increasing distance from the selector's position. When c is negative, it will reverse the order of targeting (for example, @p[c=-1] will target the furthest player). Inverse sorting does not work with @r.

Examples Template:In:

• @a[limit=3,sort=nearest] or @p[limit=3] — Select the nearest three players.
• @a[limit=4,sort=furthest] — Select the furthest four players.
• @a[limit=2,sort=random] or @r[limit=2] — Select two players, chosen randomly.

Examples Template:In:

• @a[c=3] — Select the nearest three players.
• @a[c=-4] — Select the furthest four players.
• @r[c=2] — Select two living players, chosen randomly.

Selecting targets by experience level

Filter target selection based on the entity's experience levels. This naturally filters out all non-player targets. Cannot duplicate these arguments.

Template:IN: [level=<value>] — Specifies the range of levels. Integer ranges are supported to select a range of values.

Template:IN: [l=<value>] and [lm=<value>] — the maximum and minimum level range to search for, respectively.

Examples Template:In:

• @a[level=10] — Select all players who have exactly ten levels.
• @a[level=8..16] — Select all players who have between eight and 16 levels (inclusive).

Examples Template:In:

• @a[lm=10,l=10] — Select all players who have exactly ten levels.
• @a[lm=8,l=16] — Select all players who have between eight and 16 levels (inclusive).

Selecting targets by game mode

Filter target selection by game mode. This naturally filters out all non-player targets. Arguments testing for equality cannot be duplicated, while arguments testing for inequality can.

Template:IN:

[gamemode=<gamemodeName>] — Include only players in the given game mode.

[gamemode=!<gamemodeName>] — Exclude any players in the given game mode.

Template:IN:

[m=<gamemodeName>] — Include only players in the given game mode.

[m=!<gamemodeName>] — Exclude any players in the given game mode.

Permitted values for <gamemodeName> are spectator, survival, creative, adventure. Template:IN, the shorthand values s and 0, c and 1, and a and 2 may be used for Survival mode, Creative mode, and Adventure mode respectively.

Selecting targets by name

Filter target selection by name. Values are strings, so spaces are allowed only if quotes are applied. This cannot be a JSON text compound. Arguments testing for equality cannot be duplicated, while arguments testing for inequality can.

[name=<givenName>] — Include only targets with the given name.

[name=!<givenName>] — Exclude any targets with the given name.

Selecting targets by vertical rotation

Filter target selection based on the entity's rotation along the pitch axis, measured in degrees. Values range from -90 (straight up) to 0 (at the horizon) to +90 (straight down). Cannot duplicate these arguments.

Template:IN: [x_rotation=<value>] — Specifies the range of x-rotation. Float ranges are supported to select a specific range of angles.

Template:IN [rx=<value>] and [rxm=<value>] — Specifies the maximum and minimum x-rotation, respectively.

Examples Template:In:

• @e[x_rotation=0] — Select all entities that are looking directly at the horizon.
• @e[x_rotation=30..60] — Select all entities that are looking between 30° and 60° (inclusive) below the horizon.
• @e[x_rotation=..0] — Select all entities that are looking at or above the horizon.

Examples Template:In:

• @e[rxm=0,rx=0] — Selects all entities that are looking directly at the horizon.
• @e[rxm=30,rx=60] — Selects all entities that are looking between 30° and 60° (inclusive) below the horizon.
• @e[rx=0] — Select all entities that are looking at or above the horizon.

Selecting targets by horizontal rotation

Filter target selection based on the entity's rotation along the yaw axis, measured clockwise in degrees from due south (or the positive Z direction). Values vary from -180 (facing due north) to -90 (facing due east) to 0 (facing due south) to +90 (facing due west) to +180 (facing due north again). Cannot duplicate these arguments.

Template:IN: [y_rotation=<value>] — Specifies the range of y-rotation. Float Ranges are supported to select a specific range of angles.

Template:IN: [ry=<value>] and [rym=<value>] — Specifies the maximum and minimum y-rotation values, respectively.

Examples Template:In:

• @e[y_rotation=0] — Select all entities that are facing due south.
• @e[y_rotation=-90..0] — Select all entities that are facing in the 90° between due east and due south (inclusive).
• @e[y_rotation=0..180] — Select all entities that are not facing at all east.

Examples Template:In:

• @e[rym=0,ry=0] — Select all entities that are facing due south.
• @e[rym=-90,ry=0] — Select all entities that are facing in the 90° between due east and due south (inclusive).
• @e[rym=0,ry=180] — Select all entities that are not facing at all east.

Selecting targets by type

Filter target selection based on the entity's identifier. The given entity type must be a valid entity ID or entity type tagTemplate:Only used to identify different types of entities internally. The namespace can be left out if the ID is within the Template:Cd namespace. Entity IDs or tags are case-sensitive. Arguments testing for equality cannot be duplicated, while arguments testing for inequality can.

[type=<entityType>] — Include only targets of the specified entity type or tag.

[type=!<entityType>] — Exclude any targets of the specified entity type or tag.

Selecting targets by family

Filter target selection based on the entity's type_family behavior component. Default values used by the vanilla behavior pack include among others more broad terms like mob and inanimate, as well as more specific families like zombie and skeleton, and single-mob families like wandering_trader and creeper. Multiple family arguments are allowed, and all arguments must be fulfilled for an entity to be selected.Template:Main

[family=<family>] — Include only targets in the specified type family.

[family=!<family>] — Exclude any targets in the specified type family.

• @e[family=skeleton] — Select all skeletons, wither skeletons and strays.
• @e[family=mob,family=!monster] — Select all mobs that are not also monsters (so for example cows, chickens, pigs, but not zombies or skeletons).
• @e[family=monster,family=undead] — Select all monsters that are also undead (that includes monsters like zombies and skeletons, but not creepers or endermen).

Selecting targets by NBT data

Filter target selection based on the entity's NBT data. The NBT data is written in its SNBT format. Duplicate nbt arguments are allowed, and all arguments must be fulfilled for an entity to be selected.

See NBT format#Testing NBT tags for more infomation about this.

Note that this selector argument should be used with care, as accessing NBT data is a heavy process for the CPU.

[nbt=<compoundTag>] — Include only targets with the specified NBT data.

[nbt=!<compoundTag>] — Exclude any targets with the specified NBT data.

• @a[nbt={OnGround:true}] — Select all players on the ground.
• @e[type=sheep,nbt={Color:0b}] — Select all sheep that are dyed white.
• @e[type=item,nbt={Item:{id:"minecraft:slime_ball"}}] — Selects all slime ball item entities.
• @e[nbt={Tags:[a,b]}] is the same as @e[tag=a,tag=b]. The latter is simpler and reduces CPU load.

Selecting targets by advancements

Filter target selection based on the entity's advancements. This naturally filters out all non-player targets. All advancements are in a single object, with a list of individual advancement IDs between the braces afterward. The values are true or false. For advancements with one criterion, testing for that criterion always gives the same results as testing for the advancement. Cannot duplicate this argument.

[advancements={<resource location>=<bool>}] — Include only players with the specified advancements and values.

[advancements={<resource location>={<criteria>=<bool>}}] — Include only players with the specified advancement's criteria.

• @a[advancements={story/smelt_iron=true}] — Include only players who have completed the advancement minecraft:story/smelt_iron.
• @a[advancements={story/form_obsidian=false}] — Include only players who haven't completed the advancement minecraft:story/form_obsidian.
• @a[advancements={story/follow_ender_eye=true}] is the same as @a[advancements={story/follow_ender_eye={in_stronghold=true}}].
• @a[advancements={adventure/kill_all_mobs={witch=true}}] — Include only players who have killed a witch, for the advancement minecraft:adventure/kill_all_mobs.

Selecting targets by predicate

Filter target selection by predicates. The given values must be a valid predicate represented by a resource location. Duplicate predicate arguments are allowed, and all arguments must be fulfilled for an entity to be selected.

[predicate=<resource location>] — Include only targets that match the specified predicate.

[predicate=!<resource location>] — Exclude any targets that match the specified predicate.

Selecting targets by item

Filter target selection based on whether the entity has the specified items. The given values must be enclosed by square brackets or braces. Cannot duplicate this argument, but multiple items can be specified with square brackets.

[hasitem={<argument>=<value>,<argument2>=<value2>,...}] — Include only targets that have the specified items.

[hasitem=[{<argumentA>=<valueA>,...},{<argumentB>=<valueB>,...}]] — Include only targets that have item A and item B, etc.

All acceptable arguments are as follows:

• item

  Must be an item ID.

• data

  Specifies the item data for the item(s). Must be a 32-bit integer number. Values which are invalid for the specified item id will default to 0. If not specified, defaults to 0.

  Note that because it defaults to 0, selectors like {item=potion} can only target water bottle, though {item=potion,data=1} can target mundane potion.

  Currently dosen't work on blocks' direct item forms (e.g. dirt, stone). For these items, data is always considered as invalid and defaults back to 0, and aux value of these items in inventory are also always considered as 0. That means you can't target items like coarse dirt, green wool solely.

  For potion and tipped arrow, aux value represents the data value of potion effect, and currently invalid values crash the game.

• quantity

  Specifies the amount of the items the entity has. Must be an integer range (e.g. 1 - exact match of 1. ..5 - less than or equal to 5. 5.. - more than or equal to 5. 0..5 - between 0 and 5, inclusive.).

  ! can be uesd to invert selection. For example, {item=apple,quantity=!5} can exclusive entities who have five apples.

  When not specified, defaults to quantity=1... When quantity=0, entities must have 0 the specified item (i.e. do not have the specified item) to be targeted.

• location and slot

  Specifies the inventory slot to test. See Slot for details.

  Specifying slot without location is invalid.

  slot must be an integer range. (e.g. 1 - exact match of 1. ..5 - less than or equal to 5. 5.. - more than or equal to 5. 0..5 - between 0 and 5, inclusive.)

Selecting targets by permission

[haspermission={<permission>=<state>,...}] — Filter target selection based on the player permissions status. All tested permissions are in a single object, separated by commas. Cannot duplicate this argument.

• @a[haspermission={camera=enabled}] — Include only players who have the camera permission enabled.
• @a[haspermission={movement=disabled}] — Include only players who have the movement permission disabled.
• @a[haspermission={camera=disabled,movement=enabled}] — Include only players who have the camera permission disabled and the movement permission enabled.

Player type and single type

Player type

Some command arguments require a player-type selector, while some require an entity-type selector.

Entity type means that there's no additional restrictions. Any valid selector can be used in this command argument.

A player-type selector is a selector that can only select players, including:

• Template:Cd with type=player.
• Template:Cd with type=playerTemplate:Only or without Template:Cd argument.
• Template:Cd with type=player or without Template:Cd argument.

Template:IN, if a command argument requires a player type selector, but the entered argument is not in player type, The command is unparseable.

Template:IN, if a command argument requires a player type selector, but the entered argument is not in player type, The command is parseable but failed.

Single type

Template:Exclusive Some command arguments require a single-type selector, while some require a multiple-type selector.

Multiple type means that there's no additional restrictions. Any valid selector can be used in this command argument.

A single-type selector is a selector that can only select one target, including:

• Template:Cd with limit=1.
• Template:Cd without Template:Cd argument.
• Template:Cd without Template:Cd argument or with limit=1.

If a command argument requires a single-type selector, but the entered argument is not in single-type, The command is unparseable.

See also

• Commands
• Entity format